Rate this post by selecting a number. 1 is the worst and 5 is the best.

Author Message   Scott Corder New member Username: Pastcommodore Post Number: 32 Registered: 02-2001 Rating: N/A Votes: 0 Posted on Friday, June 07, 2002 - 12:50 pm:    George, I had similar but slightly different problems several years ago. Advice from Martec led to me replacing the clutch. Chances are its conical (cone shaped) and this can cause the problems you're having. I'd check the clutch. If your zinc is mounted in a favorable position, you can slide the shaft back and actually replace the clutch while the boat remains in the water.

Administration Log Out