Topics Topics Edit Profile Profile Help/Instructions Help Member List Member List  
Search Last 1|3|7 Days Search Search Tree View Tree View  

Rate Post

Rate this post by selecting a number. 1 is the worst and 5 is the best.

    (Worst)    1    2    3    4    5     (Best)

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Gary Hendrickson

Rating: N/A
Votes: 0

Posted on Wednesday, June 28, 2000 - 12:41 am:   
My boat came with 3/8 inch technora for the two
wing halyards. I had no trouble reaving a new
wire/rope splice halyard for the jib, going wire
first with a messenger and then installing the
shackle on the end.

However this Spring I could not reave a 5/16 tail
on a 3/16 Tek-12 without totaling loosening the
jibstay first and pulling it up and away from the
center sheave first - there's a lot less clearance
for the center sheave.

NOMAD #094

Administration Administration Log Out Log Out