Rate this post by selecting a number. 1 is the worst and 5 is the best.

Author Message   glen (Glen) Rating: N/A Votes: 0 Posted on Tuesday, January 29, 2002 - 07:42 pm:    Jeff, My two setscrews are located on the port side of the center of the tube roughly 1 1/2 inches from each end. These are 1/4-20 thread and I cannot remember the size of the hex wrench. Just go to the local West Marine (or equivalent), grab some 1/4-20 set screws and use those to size the hex wrench.

Administration Log Out