    
Eric Yaremko
Unregistered guest
Rating: N/A
Votes: 0 | | Posted on Saturday, November 27, 2004 - 06:37 pm: | |
Brad
Plate is actually multiple layers of poor grade stainless-(one of the crew is an engineer with a metallurgist brother) it needs to be completely removed. My repair was done by yard. I had area of delam. about 2 ft around partner. This was dried, resin injected, then squashed with jacks to reattach/bond. Hole repair was 1 ft. diam.solid resin/glass lay-up with Torreson's "mould" glassed in. Beyond my skill to get everything to cure properly and would be hell to pay if it didn't.Boat has been raced for 1 1/2 years without problem. Good luck
Eric Yaremko |
